Polaris RZR Pro R 4 Seater Tender Spring Kit (Walker Evans Shocks)

A spring refresh for the Walker Evans-equipped Pro R four-seater.

Upgrade the tender springs on your four-seat Polaris RZR Pro R with this All Thingz UTV kit for Walker Evans shocks. It is intended to improve trail comfort while keeping the main springs and shock assemblies already on your machine. Include your typical passenger and accessory load with the order.

What this kit offers

Trail comfort: Tender springs intended to soften harsh impacts over uneven ground.
Keep your main springs: Replace the tender springs without purchasing complete shock assemblies.
Choose the work you need: Full-kit, front-pair, and rear-pair options are available.

Vehicle fitment

Model	Polaris RZR Pro R
Seat count	Four-seat
Shock package	Walker Evans

Before ordering: Verify the installed Walker Evans shocks, confirm your model and seat count, and double-check your spring color. This is the Pro R four-seat application. Match the complete model name and shock package; other RZR models use separate kits.

What's included

Option	Contents
Full kit	Two front and two rear tender springs
Front springs only	Two front tender springs
Rear springs only	Two rear tender springs

Select an available raw or powder-coated finish. Powder coating is completed in-house at All Thingz UTV; some colors carry an additional charge.

Tender springs or a dual-rate kit?

This tender kit retains your existing main springs. For an upper-and-lower spring replacement, compare the Pro R four-seat dual-rate kit with universal shock fitment. Review its kit options and contents before ordering.

Installation overview and setup

Use the Polaris service procedure for your exact model year and installed shock package, together with the instructions for this All Thingz UTV spring kit. Safely support the vehicle and release spring tension with appropriate equipment before removing spring retainers. Use your model's fastener torque specifications during reassembly.

Polaris's suspension diagrams identify where factory preload measurements are taken. Those shock measurements are separate from ground clearance. Factory spring preload dimensions must not be copied directly onto a different spring kit.

All Thingz UTV ride-height baseline

The following figures are All Thingz UTV setup baselines for this RZR Pro R spring-kit application, organized by tire size. They are not Polaris factory specifications or independently verified measurements for every vehicle configuration.

Tire size (inches)	ATU baseline height (inches)
32	18.0
33	18.5
34	19.0
35	19.5
37	20.5

Measurement reference: Ground to the underside of the skid plate, with the vehicle on level ground and the suspension settled after moving the vehicle forward and backward. Use consistent reference points when comparing measurements. These starting references do not guarantee a finished height; tire dimensions, pressure, passengers, accessories, and suspension setup affect the result. Listed tire sizes do not confirm tire fitment.

Polaris factory ground-clearance reference

The following figures are published for the 2024 Polaris RZR Pro R in its factory configuration. They are factory specifications, not front/rear loaded ride-height targets for this aftermarket tender spring kit. Other model years and configurations must be checked in their own manual.

Factory tire configuration	Published ground clearance
32-inch factory tires	16 inches

Polaris 2024 RZR Pro R owner's manual — specifications and suspension settings

Follow the installation procedure and adjustment limits for your exact model and shock package. Contact All Thingz UTV for help with your spring-kit setup if your vehicle configuration requires additional guidance.

Spring installation video

General installation overview: Steps, hardware, and adjustments may differ by model year and shock package. Follow the service procedure for your machine and All Thingz UTV settings for this kit.

Other Pro R tender spring kits

These are alternative applications, not required add-ons.