Polaris RZR Turbo R 2 Seater Tender Spring Kit (Fox Shocks)

Keep your Fox shocks and upgrade your two-seat Turbo R tender springs.

This All Thingz UTV tender spring kit matches the Polaris RZR Turbo R two-seat application with Fox shocks. It is designed to reduce harshness on uneven trails while retaining your main springs. Choose a full set or an individual axle pair, then follow the model-specific setup guidance below.

What this kit offers

Trail comfort: Tender springs intended to soften harsh impacts over uneven ground.
Keep your main springs: Replace the tender springs without purchasing complete shock assemblies.
Choose the work you need: Full-kit, front-pair, and rear-pair options are available.

Vehicle fitment

Model	Polaris RZR Turbo R
Seat count	Two-seat
Shock package	Fox

Before ordering: Verify the installed Fox shocks, confirm your model and seat count, and double-check your spring color. This is the Turbo R two-seat application. Match the complete model name and shock package; other RZR models use separate kits.

What's included

Option	Contents
Full kit	Two front and two rear tender springs
Front springs only	Two front tender springs
Rear springs only	Two rear tender springs

Select an available raw or powder-coated finish. Powder coating is completed in-house at All Thingz UTV; some colors carry an additional charge.

Tender springs or a dual-rate kit?

This tender kit retains your existing main springs. For an upper-and-lower spring replacement, compare the Turbo R two-seat dual-rate kit with universal shock fitment. Review its kit options and contents before ordering.

Installation overview and setup

Use the Polaris service procedure for your exact model year and installed shock package, together with the instructions for this All Thingz UTV spring kit. Safely support the vehicle and release spring tension with appropriate equipment before removing spring retainers. Use your model's fastener torque specifications during reassembly.

Polaris's suspension diagrams identify where factory preload measurements are taken. Those shock measurements are separate from ground clearance. Factory spring preload dimensions must not be copied directly onto a different spring kit.

All Thingz UTV ride-height baseline

The following figures are All Thingz UTV setup baselines for this RZR Turbo R spring-kit application, organized by tire size. They are not Polaris factory specifications or independently verified measurements for every vehicle configuration.

Tire size (inches)	ATU baseline height (inches)
32	18.0
33	18.5
34	19.0
35	19.5
37	20.5

Measurement reference: Ground to the underside of the skid plate, with the vehicle on level ground and the suspension settled after moving the vehicle forward and backward. Use consistent reference points when comparing measurements. These starting references do not guarantee a finished height; tire dimensions, pressure, passengers, accessories, and suspension setup affect the result. Listed tire sizes do not confirm tire fitment.

Polaris factory ground-clearance reference

The following figures are published for the 2024 Polaris RZR Turbo R in its factory configuration. They are factory specifications, not front/rear loaded ride-height targets for this aftermarket tender spring kit. Other model years and configurations must be checked in their own manual.

Factory tire configuration	Published ground clearance
32-inch factory tires	16 inches

Polaris 2024 RZR Turbo R owner's manual — specifications and suspension settings

Follow the installation procedure and adjustment limits for your exact model and shock package. Contact All Thingz UTV for help with your spring-kit setup if your vehicle configuration requires additional guidance.

Spring installation video

General installation overview: Steps, hardware, and adjustments may differ by model year and shock package. Follow the service procedure for your machine and All Thingz UTV settings for this kit.

Other Turbo R tender spring kits

These are alternative applications, not required add-ons.