Polaris RZR XP 1000 2 Seater Level Up Spring Kit (Required For 2017-20

Level Up spring upgrade for your two-seat Polaris RZR XP 1000.

Configure an All Thingz UTV Level Up spring upgrade for your two-seat Polaris RZR XP 1000. Designed for the 2017–2021 two-seat XP 1000 Level Up application. It combines front lower springs and dividers with tender springs, depending on your selected package. If you already own the ATU tender upgrade, contact us about the listed prorated upgrade option.

What this kit offers

Ride comfort: Springs intended to reduce harsh trail impacts with the correct setup for your vehicle.
Keep your shock assemblies: This is a spring upgrade; replacement shocks are not included.
Choose the package you need: Review the contents below before selecting a full or partial kit.

Vehicle fitment

Fitment detail	Application
Model	Polaris RZR XP 1000
Seat count	Two-seat
Model years	2017–2021

Before ordering: Match the complete model name, seat count, and installed shocks. Double-check your selected spring color and package. Provide your model year, usual passenger/cargo load, and suspension modifications with your order.

What's included

Option	Contents
Full kit	Two front lower custom-rate springs, four custom-rate tender springs, and two dividers
Front only	Two front lower custom-rate springs, two custom-rate tender springs, and two dividers
Front lowers only	Two front lower springs and two dividers
Rear only	Two rear custom-rate tender springs

Select an available raw or powder-coated finish. Powder coating is completed in-house at All Thingz UTV; some colors carry an additional charge.

Installation overview and setup

Follow the Polaris service procedure for your exact model year and the instructions for your installed shocks. Professional installation is recommended. The video below is a general spring-installation overview.

Record the starting ride height on level ground and note the vehicle's normal operating load.
Safely raise and support the vehicle. Unload the suspension before preload adjustments and release spring tension with suitable equipment before removing retainers.
Install the springs supplied in your selected package using the applicable front and rear shock procedures. Torque removed fasteners to your exact model's specifications.
Lower the vehicle and move it forward and backward to settle the suspension before remeasuring.
Follow the shock manufacturer's adjustment limits. Make small changes with the suspension unloaded, then settle and remeasure. Keep left and right settings matched on each axle.

For settings specific to your kit and vehicle configuration, contact All Thingz UTV.

All Thingz UTV ride-height baseline

These figures are All Thingz UTV setup baselines for this RZR XP 1000 spring-kit application. They are not Polaris factory specifications or independently verified measurements for every vehicle configuration.

Tire size (inches)	ATU baseline height (inches)
28	13.5 ± 0.5
29	14.0
30	14.5
31	15.0
32	15.5
33	16.0
34	16.5
35	17.0
36	17.5

Measurement reference: Ground to the underside of the skid plate, on level ground with the suspension settled after moving forward and backward. Use consistent reference points when comparing measurements. Tire dimensions, pressure, passengers, accessories, and suspension setup affect the result. Listed tire sizes do not confirm tire fitment.

Spring installation video

General installation overview: This video demonstrates spring installation concepts. Hardware, procedures, and adjustments can differ by model year, shock package. Use the instructions for your exact setup.