Vendor:304 OFFROAD
Trail comfort for your 2024+ four-seat XP 1000 with Fox shocks.
The All Thingz UTV 2024+ Polaris RZR XP 1000 four-seat tender spring kit for Fox shocks is built for the redesigned four-seat application and is intended to reduce harshness on uneven trails. Upgrade the tender springs while retaining your existing Fox shock assemblies and main springs. Select a full set or an axle pair, and include your usual passenger and accessory load with your order so your setup can be considered.
What this kit offers
- Trail comfort: A spring upgrade intended to reduce harshness over uneven ground.
- Retain your main springs: This is a tender-spring replacement, not a complete shock or upper-and-lower spring package.
- Setup reference: Use model-specific setup instructions; tire size and vehicle load affect the final setup.
Vehicle fitment
| Model | Polaris RZR XP 1000 |
|---|---|
| Body style | 2024+ redesigned XP 1000 |
| Seat count | Four-seat |
| Shock package | Fox |
Before ordering: Check the shocks installed on your machine and confirm your selected spring color. Choose this kit for the 2024+ four-seat XP 1000 with Fox shocks. Earlier-body XP 1000 models, two-seat machines, and Walker Evans-equipped models have separate listings.
What's included
| Option | Contents |
|---|---|
| Full kit | Two front and two rear tender springs |
| Front springs only | Two front tender springs |
| Rear springs only | Two rear tender springs |
Choose from the raw or powder-coated finishes offered in the color selector. Powder coating is completed in-house; some colors have an additional charge. Shock assemblies and main springs are not included.
Tender springs or a dual-rate kit?
This kit retains your main springs. For an upper-and-lower spring replacement, compare the 2024+ XP 1000 four-seat dual-rate spring kit with universal shock fitment. Review that kit's selected option and contents before ordering.
Installation overview and setup
Use the Polaris service procedure for your exact model year and installed shock package, together with the instructions for this All Thingz UTV spring kit. Safely support the vehicle and release spring tension with appropriate equipment before removing spring retainers. Use your model's fastener torque specifications during reassembly.
Polaris's suspension diagrams identify where factory preload measurements are taken. Those shock measurements are separate from ground clearance. Factory spring preload dimensions must not be copied directly onto a different spring kit.
All Thingz UTV ride-height baseline
The following figures are All Thingz UTV setup baselines for this RZR XP 1000 spring-kit application, organized by tire size. They are not Polaris factory specifications or independently verified measurements for every vehicle configuration.
| Tire size (inches) | ATU baseline height (inches) |
|---|---|
| 28 | 13.5 ± 0.5 |
| 29 | 14.0 |
| 30 | 14.5 |
| 31 | 15.0 |
| 32 | 15.5 |
| 33 | 16.0 |
| 34 | 16.5 |
| 35 | 17.0 |
| 36 | 17.5 |
Measurement reference: Ground to the underside of the skid plate, with the vehicle on level ground and the suspension settled after moving the vehicle forward and backward. Use consistent reference points when comparing measurements. These starting references do not guarantee a finished height; tire dimensions, pressure, passengers, accessories, and suspension setup affect the result. Listed tire sizes do not confirm tire fitment.
Polaris factory ground-clearance reference
The following figures are published for the 2024 Polaris RZR XP 1000 in its factory configuration. They are factory specifications, not front/rear loaded ride-height targets for this aftermarket tender spring kit. Other model years and configurations must be checked in their own manual.
| Factory tire configuration | Published ground clearance |
|---|---|
| 29-inch factory tires | 14 inches |
| 30-inch factory tires | 14.5 inches |
Polaris 2024 RZR XP 1000 owner's manual — specifications and suspension settings
Follow the installation procedure and adjustment limits for your exact model and shock package. Contact All Thingz UTV for help with your spring-kit setup if your vehicle configuration requires additional guidance.
Spring installation video
General installation overview: Steps, hardware, and adjustments may differ by model year and shock package. Follow the service procedure for your machine and All Thingz UTV settings for this kit.
Find the kit for your RZR configuration
Use these alternatives if your shock package or seat count differs. Each is a separate application.
RECENTLY VIEWED PRODUCTS